Commercial and Federal Facilities Section.

Board (SHW)

FAQs

Laws & Rules

Permits

Programs

Public Participation

Records Request

About DSHW

Acronyms

Contact DSHW

Organization Chart

DSHW Home > Commercial & Federal Facilities > TOCDF RCRA Hazardous Waste

Commercial and Federal Facilities Section:
TOCDF RCRA Hazardous Waste Permit

The mission of TOCDF is to destroy the aging chemical munitions stockpile in storage at the Deseret Chemical Depot. The Chemical Demilitarization Section of the Utah Division of Solid and Hazardous Waste regulates this process through a RCRA Part B Permit. The Chemical Demilitarization Section also has an oversite program to ensure compliance with all permit conditions.

Introduction and Signature

Table of Contents

List of Modules

  1. Standard Permit Conditions
  2. General Facility Conditions
  3. Containers
  4. Tank Systems
  5. Incineration - Long Term
    • General Conditions For Incinerators and Furnaces
    • Liquid Incinerators (LICs)
    • Metal Parts Furnace (MPF)
    • Deactivation Furnace System (DFS)
    • Common Stack for LICs, MPF, DFS
  6. Short Term Incineration
    • General Conditions For Incinerators and Furnaces
    • Liquid Incinerators (LICs)
    • Metal Parts Furnace (MPF)
    • Deactivation Furnace System (DFS)
  7. Corrective Action for Spill Sites Resulting from Permittee or Subcontractor Activities
  8. Demilitarization Miscellaneous Treatment Units
  9. Reserved
  10. Air Emission Standards for Equipment Leaks, Tanks, Containers, and the HVAC
  11. CAMDS Containers and Containment Rooms
  12. CAMDS Tank Systems

List of Tables

  1. Agent Exposure Limits and Agent Stack Limits
  2. Hazardous Wastes/Permitted Hazardous Waste Management Units
  3. Reserved
  4. Hazardous Waste Sump Systems
  5. Sumps System Design Standards

List of Appendices

  1. Acronyms and Abbreviations
  2. Definitions

List of Attachments

  • 1. Facility Description
  • 2. Waste Analysis Plan
  • 3. Sampling, Analytical, and QA/QC Procedures
  • 4. Security Procedures
  • 5. Inspection Plan
  • 5a. Inspection Logs
  • 6. Instrument Calibration Plan & Incinerator Waste Feed Interlock Function Test
  • 7. Training Plan
  • 8. Preparedness and Prevention
  • 9. Contingency Plan
  • 10. Closure Plan
  • 11. General Facility Drawings
  • 12.Containers
  • 13. Reserved
  • 14. Demilitarization Miscellaneous Treatment Units
  • 15. Reserved
  • 16. Tank Systems
  • 17. Equipment Lists
  • 18. Reserved
  • 19. Instrumentation and Waste Feed Cut-Off Tables
  • 20. Continuous Emission Monitoring System (CEMS) Plans
  • 21. Reserved
  • 22, Agent Monitoring Plan
  • 22a ATLIC Agent Monitoring Plan
  • 23. CAMDS Site Laboratory and Monitoring Quality Control Plan
  • 24. CAMDS Inspection Plan
  • 25. CAMDS Closure Plan
  • 26. CAMDS Facility Drawings
  • 27. CAMDS Containers, Storage & Waste Piles
  • 28. CAMDS Tank Systems
  • 29. CAMDS Site Monitoring Plan
  • 30. CAMDS Filter Systems
  • 31. CDRL24LQCP
  • ATLIC Surrogate Trial Burn Plan
  • Lewisite Comprehensive Performance Test

    • Comments or Questions

    If you have any question, please contact either Tom Ball, Tina Mercer, or Brad Lauchnor (801-536-0200).

    Top